Outlet Adapter Sleeve- Reducing Mikuni 40mm OD spigot to 36mm
(No reviews yet)
Write a Review
- SKU:
- smc-4036
Frequently bought together:
Description
This Mikuni outlet adapter sleeve is for reducing the spigot diameter on your carbs motor end outlet from 40mm to 36mm, when installed using Loctite 620
Related Products
Related Products
Mikuni Rubber 45 Degree Mounting Manifold Sleeve, for 40mm Spigot
$29.99
This heavy duty 45 degree Mikuni rubber motorcycle carburetor mounting sleeve / boot type manifold adapter has a 40mm ID hole at each end which comfortably suits carburetor spigots with either 38mm,...
Air-box Adapter Mikuni Carbs- Reducing 58mm spigot to 50mm -18mm ext.
Mikuni
$36.00
For Reducing the carb air-intake outside diameter down to 50mm (2″) and extending the total length of the carb by 18mm. This Mikuni Carburetor air-box adapter for is designed for use on our VM30,...
Air-box Adapter Mikuni Carbs- Reducing 58mm spigot to 46.5mm -14mm ext
Mikuni
$36.00
For Reducing the carb air-intake outside diameter down to 46.5mm and extending the total length of the carb by 14mm. This Mikuni Carburetor air-box adapter for is designed for use on our VM30, VM32,...
Air-box Adapter Mikuni Carburetor | 58mm spigot to 55mm | 20mm ext.
Mikuni
$36.00
Air-box Adapter Mikuni Carburetor | 58mm spigot to 55mm | 20mm ext. For Reducing the carb air-intake outside diameter down to 55mm and extending the total length of the carb by 18mm.
Mikuni RS 36mm Carb Kit- Honda DOHC CB1100
Mikuni
$1,290.95 - $1,360.95
This Mikuni RS36 carburetor kit is primarily designed for the Honda DOHC CB1100. This upgrade can significantly enhance your motorcycle's performance, potentially increasing power by up to 25%, while...